Round Wooden Coffee Table – Angled Legs, Dark Charcoal Tone
A low wooden coffee table with a round top. The dark charcoal-toned top is carried on thick, angled wooden…
Door Models
Wooden doors are chosen for their grain, and the grain is decided long before a leaf reaches site. In this section you will find the wood-faced door models we produce, from plain flush leaves to panelled and grooved designs. Oak, walnut and ash are the species we use most often; other veneers can be sourced when a project calls for them.
All products
Rectangular Wooden Coffee Table – Angled Cross Base, Dark Tone
A wooden coffee table with a long, rectangular top. The slim-looking dark top rests on angled flat wooden…
Wooden Coffee Table – Pyramid-Relief Sides, Dark Oak Tone
A low, rectangular wooden coffee table. The sides of the body are worked with rows of pyramid-shaped…
Walnut-Tone Classic Door – Three Panels, Pilaster Casing
Product code: 4064
A classic interior door in a walnut-tone wood. The leaf has three moulded panels: tall at the top, narrow in…
Patinated White Wooden Door – Corniced Head, Arched Panel
Product code: 4065
A classic wooden door with a patina effect over a white base. The leaf has an arched upper panel above a…
Oak Veneer Wooden Door – Horizontal Grooves, Black Handle
Product code: 4001
A flush interior door with an oak-tone wood veneer. The centre of the leaf is divided into equal panels by…
Oak-Tone Wooden Door – Staggered Brick-Pattern Panels
Product code: 4002
A modern interior door with an oak-tone wood surface. The leaf is made up of horizontal and vertical panels…
Oak-Tone Double Door – Brick-Pattern Panel Layout
Product code: 4003
A two-leaf interior door in an oak-tone wood finish. On both leaves the panels are staggered in a brick-like…
Light Oak Interior Door – Asymmetric Panel Lines
Product code: 4004
An interior door with a light oak-tone surface and horizontal grain. Thin dark lines divide the leaf into…
Oak-Tone Wooden Door – Diagonal Groove Pattern
Product code: 4005
An interior door with an oak-tone wood surface and parallel diagonal grooves running across the centre of…
Walnut-Tone Front Door – Wrought-Iron Glass Sidelight
Product code: 4007
A walnut-tone wooden front door with an arched upper panel. Vertically grooved panels fill the upper…
Wooden Front Door – Brass Hardware, White Shuttered Sidelights
Product code: 4008
A raised-panel entrance door in a warm wood tone. A dentil moulding runs between the upper and lower panels…
White Lacquered Double Door – Tall Glass, Lower Panels
Product code: 4009
A white lacquered double interior door. Each leaf has a tall vertical glass pane above a small moulded…
Anthracite Lacquered Door – Tall Frosted Glass, Lower Panel
Product code: 4011
A tall, narrow interior door in anthracite grey lacquer. A long frosted glass pane fills the upper section…
White Lacquered Classic Door – Moulded Panels, Brass Handle
Product code: 4012
A white lacquered interior door with classic lines. The leaf has two moulded panels, one tall and one short…
Walnut-Pattern Flush Door – Horizontal Grain Finish
Product code: 4013
A modern flush interior door with a walnut-pattern finish. The grain runs horizontally across the leaf, and…
Light Oak Flush Door – Horizontal Grain, Modern Living
Product code: 4014
An interior door with a light oak-tone flush surface and horizontal grain. The frame and architrave match…
Walnut-Tone Classic Wooden Door – Three Raised Panels
Product code: 4015
Classic interior doors in a walnut-tone wood. Each leaf has three raised panels topped by a moulded head…
Navy Lacquered Door – Glazed, Herringbone Panel, Narrow Leaf
Product code: 4016
A tall, narrow interior door in navy lacquer. A frosted glass pane sits in the upper section, with…
Taupe Lacquered Classic Door – Three Moulded Panels
Product code: 4017
A classic interior door finished in taupe (grey-beige) lacquer. The leaf has three moulded panels, and the…
Navy Glazed Lacquered Door – Herringbone Grooved Lower Half
Product code: 4018
A standard-width interior door in navy lacquer. Frosted glass fills the upper half, while the lower half…
Navy Lacquered Door – Two Moulded Panels, Chrome Handle
Product code: 4019
A solid interior door in navy lacquer, without glazing. The leaf has two moulded panels, one tall and one…
Oak-Tone Front Door – Horizontal Panels, Frosted Sidelight
Product code: 4020
An oak-tone wooden front door with four horizontal panels. A narrow frosted-glass sidelight stands beside…
Walnut-Tone Classic Door – Arched Panel, Stained Glass
Product code: 4021
Classic-style interior doors in a walnut-tone wood. The leaves feature an arched upper panel with a carved…
When several doors line up along one wall, we sequence the veneer leaves so that the figure flows from door to door instead of changing abruptly. Frames and architraves are cut from the same batch to keep the tone consistent. Finishes range from a natural matt lacquer that leaves the wood looking almost untreated to a stained surface for darker interiors, and every finish is sampled on a real offcut before production.
Our Istanbul workshop builds each leaf on a stable core so that seasonal humidity changes do not twist it. If you send us the door list with your preferred species, we can return veneer samples together with the quotation.
Frequently Asked Questions
How durable are the door models?
-
Door models produced with quality materials and professional production techniques offer durable use for many years. With proper care, solid wood doors, lacquered doors and veneer doors can be used trouble-free for 15-20 years or longer.
What materials are used in door production?
-
Door production generally uses solid wood, MDF panels, wood veneer surfaces and lacquer paint systems. To increase the door's durability, quality hinge, lock and hardware systems are chosen.
Do you produce custom-made doors?
-
Yes. We carry out custom-made door production to suit the dimensions and architectural structure of the space. The project area is measured and the door model, design and material options are determined according to the customer's needs.
How long does the door production and installation process take?
-
Door production time may vary depending on the size of the project and the chosen model. Door production is generally completed within a few weeks of design approval, after which installation is carried out by professional teams.
How should door models be cleaned and maintained?
-
Door surfaces should be cleaned with a soft, damp cloth. Abrasive chemicals should not be used. With regular care, doors keep their original appearance for many years.